From flat sheet to finished part
Loading
The Euromac Load&Unload system automatically feeds sheets from the stack into the line.
Punching and cutting
The Shear XT combines punching and shearing in one machine. The punching unit punches and forms, and the integrated shear separates the parts in seconds with no micro-joints.
Linking
The blanks move on automatically to the bending center. No intermediate storage, no manual handling.
Folding
The Multibend-Center bends fully automatically, scratch-free and with high repeatability. Fast tool change enables a wide range of variants.
Unloading
At the end of the line, a robot can remove and stack the finished parts. The intelligent RAS unloading robot needs no teaching or programming, and stacking strategies are selectable.
Two specialists. One line.
RAS Multibend-Center
Fully automatic, fast bending of precision parts, regardless of batch size.
- Fully automated bending processes for maximum efficiency
- Optional robot unloading and pallet station
- Fast tool change for a wide range of variants
- Maximum precision and repeatability
- Scratch-free bending and long-lasting tools
- All positive and negative bends, automatically
“Just by the automatic tool setup, we realize time savings of up to 80% compared to press brakes.”
Frank Felmet, Managing Director, Walter Th. Hennecke GmbHEuromac Shear XT
Combines punching and shearing in one machine.
- Cuts up to 1500 × 1000 mm in seconds, with very high precision
- Cutting lengths up to 3000 mm without repositioning
- High cutting speed
- No micro-joints
- Average material savings of 15 to 20%
- Lower energy consumption than punching
Cuts up to 1500 × 1000 mm in just seconds, with no micro-joints.
Source: EuromacYour line. Your machines.
The combination with Euromac shows one possible configuration. The Multibend-Center can equally be linked to laser cutting systems from other manufacturers, including machines already running in your production.
- Direct linking with punching machines, e.g. via the MiniFeeder
- A range of loading and unloading concepts, from gantry loaders to robots
- Optional unloading robot at the end of the line to stack finished parts
- Practical example: combined punching-bending line with punching modules from Pivatic and a RAS automated panel bending line at Schneider Electric
Flexible at both ends
Manual, gantry or robot: you configure the loading and unloading side of the Multibend-Center to suit your production.
Your line, designed around your parts
Tell us what you manufacture and which machines you already use. We will get back to you with a proposal for your line.
- Your typical parts, ideally as a drawing or photo
- Material thicknesses, formats and quantities
- Existing punching, laser or cutting systems
Frequently asked questions
The Shear Multibend Center is an automated line from flat sheet to finished bent part. It combines punching and shearing technology from Euromac with the RAS Multibend-Center and covers punching, forming, tapping, cutting and folding.
Yes. The Multibend-Center can also be linked to laser cutting systems from other manufacturers or to machines already running in your production. Options include direct linking via the MiniFeeder and a range of loading and unloading concepts.
The Shear XT combines punching and shearing in one machine. It cuts formats up to 1500 × 1000 mm in just seconds, with very high precision and no micro-joints. According to Euromac, it saves 15 to 20 percent of sheet material on average and uses less energy than punching.
The Multibend-Center bends fully automatically, scratch-free and with high repeatability. Fast tool change enables a wide range of variants. One user reports set-up time savings of up to 80 percent compared with press brakes.