Software versions
Have you signed a software update agreement?
This allows you to update your office software to the next level.
- Includes free Office software updates
- For updates of additionally purchased Office licenses, the update packages for subsequent licenses are required
- Online connection to the PC must be available
What do I need to do?
Please contact RAS. After checking the data, we will contact you. We need the following information:
- Adress
- Contact person with Email and Phone
- Machine number
Version 3.6.1.982
- New language files implemented
- New upper beam tools implemented
- New folding beam tools implemented
- New UpDown tools integrated
- New manipulator clamping foot implemented
Version 3.5.0.44600
- New bending beam tools implemented
- Internal bends implemented for CAD import parts
- new languages implemented
- Import category implemented
- during STEP import the material thicknesses valid for the machine are requested
- and not imported in case of overrun or underrun
- Other small improvements
Version 3.4.12.43997
- New upper beam tools implemented
- New folding beam tools implemented
- Tables for asymmetric tool arrangement implemented
- Parameters for standard setting of envelope position below the tool adjusted
- When creating new material tables, always start with default material tensile strength
- Error corrections when entering tables into the program for the use of UpDownTools
- Optimizations at GEO import
- Optimizations at STEP import
Version 3.4.2.42269
- Improved outline identification due to selectable background color during DXF import
- Optimized analysis of bending lines
- Selection menu for material type: Correct calculation of unfolded part due to more intuitive selection of material during STEP import
- The correct bending radius is automatically calculated when importing GEO files
- Further optimizations when importing GEO files
- In the parameters, axes speeds can be preset, which will be used in the .pgm export
- Parameters categorized and translated to German. Parameters are shown in German language if "German" is selected
Version 3.4.1.41477
- New look of the evaluation stars
- Tool change menu: Symbols show in which beams a tool change needs to be done
Version 3.3.1.38963
- New upper beam tools implemented
- New folding beam tools implemented
- New UpDown tools implemented
Automatic program creation for:
- parts with the last bend negative
- parts with closed profiles
- narrow or small parts that require different manipulator clamping feet for manipulation
Version 3.2.0.33359
- New upper beam tools implemented
- New folding beam tools implemented
Additional bending strategies by:
- Main manipulator clamping over holes and cutouts
- Aligning oblique blanks parallel to the loading manipulator
- Correct evaluation of tool changes in the bending sequence simulation
- Improved calculation of the blank loading position (less tool changes and faster bending cycles)
- Optimized radius step bending by input of:
- Material type
- Radius dimension
- Bending length
- Step length
- Selection of different UpDownTools
Version 3.1.4.29058
- Large blanks are shown correctly in the simulation
- Setup lengths with fix tool tables no longer dependent on the AIl-In-1 file
- New tool geometries implemented
Version 3.1.1.25943
- Integration of fix tool tables
- Improved setting of the measuring points for oblique parts
- New upper beam tool geometries
- New bending strategies added
- Improved calculation of protrusions on bent parts
- Improved calculation of axis movements
- Bending of negative radii
- Improved calculation of bent parts with radii
- Different merging radii are better recognized
- Improved activation and deactivation of corner tools
- Foreground parameter "Upperbeam_FreeSpace" implemented
Version 3.0.10.21941
- Measuring points on blanks without notches set to min 10 mm from outside
- On blanks with notches the measuring points are pre-set in the center of the flange
- Option Manipulator clamping with high pressure selectable in Bendex parameter list (Notice small manipulators!)
- New folding beam tools implemented
Version 3.0.6.19912
- Strategies for parts with hems on all sides and subsequent negative bends
- Display of the tool numbers for the actual tool setup
- Program adjustment for radius bends
Version 3.0.3.18455
- Hole editor added in input area
- New folding beam tool geometries added
- Step Bending: Bend angle correction added to front parameter list
- Step bending: Variables FB-Start and -end adjusted in .pgm output
- A reference point indicates the blank loading direction
- Parameter adjustments for RAS 79.31-2
- Angle will be inverted when loading .dxf, .dwg, and .igs .geo files
Version 3.0.0.17318
- UpDownTool position optimized in simulation
- Load orientation selectable for blanks with an aspect ratio up to 60:40 (Factor 1.5)
- Folding sequences optimized
- Main manipulator repositioning offset V23 corrected for the 3-meter-machine
- Program name length extended to 260 max characters (starting from CellControl 2.0.9.2)
- Manipulator position corrected if blanks come with center holes
- Simple boxes with oblique bend lengths will be programmed autoamtically
- New upper beam tool geometry integrated (PartNo 242745)
- All-in-One file (AI1) will be loaded correctly for all machine lengths
- Number of folding beam basic segments corrected for different machine lengths
Version 2.3.5.15402
- Folding strategies include programs with 180 degree rotated folding beam tools (function needs to be activated in parameter list)
- Import of pats with two cross-sections
- Center bend line as the default setting for STEP import
- Turkish language
- Visual/dynamic graphic adaptation when changing the hem height
- STEP import of too small radii are always adjusted to 1x sheet thickness
Version 2.3.5.15014
- Parameter for setting the upper beam open height after pre-bending and hemming (standard 45mm, so that corner tools have enough space for rotation. No collision check! When changing check collision with part)
- Improved folding strategy with corner tools
Version 2.3.4.14850
- Improved folding strategies with corner tools
- STEP import: Automatic hem heights detection. If the hem height is less than the min closing height, the dimension will be set to min. 2x sheet thickness + 2x original radius.
- Non-parallel hems will be detected and shown correct
- Parts with cutouts in the center will be programmed with off-center loading. Main manipulator repositioning within the program.
- Position of UpDownTools will be transferred to CellControl
- Parameter for closing a hem with the heel of the roto-corner tools
- 9mm wide folding beam tools added to the tool libary
Version 2.3.0.13501
- Parameter for length adjustment of the first flange
- Measuring point changes are transferred into the program
- Image generated from the programmed part orientation. Transfer to CellControl as blank loading orientation for the operator
- Bending negative hems
- Close hems with the heel of the upper beam tool
- Tool changes within the folding sequence
- Measuring point values adjusted depending on the configuration when reading the ALLinONE file
- Main manipulator repositioning improved
Version 2.1.6.11767
- Machine selection: 79.22-2, 79.26-2 or 79.31-2
- Sequences "long sides before short sides" and "short sides before long sides"
- Automatic corner tool activation within the folding sequence
- Main manipulator repositioning within the folding sequence
- Multi-sided parts
- Measuring point setting according to rules
- Tool changes within folding sequence (Program structure available, FixTool tables must be added manually)
- Import of STEP , DXF and GEO files
- Springback compensation tables will be automatically used for the program. If no such table exists a wildcard will be created eg: 90+0 degrees
- mm / inch integrated
- Loading the machine ALLinOne file with machine identification
- Special tools can be added
- Creation of hems
- Creation of radii
- Folding beam tool gaps will be calculated automatically
- Radius adjustment at different bend angles